Day: August 17, 2026

Your paint sprayer is spitting because worn tips, clogged filters, or misaligned internal parts are disrupting paint flow. Dirt or dried paint buildup can block the nozzle, while seals or pins that aren’t seated properly cause leaks and inconsistent spraying.

You’ll want to check and clean filters, inspect for damaged components, and adjust the seat and tip for a smoother finish. Keep reading, and you’ll find helpful tips to fix and maintain your sprayer for reliable results.

To clean out your paint sprayer in seven easy steps, first unplug it and clear your workspace. Then, empty any leftover paint from the container.

Next, prepare buckets with water or cleaning solution suited to your paint type and flush the system thoroughly.

Remove and clean filters, nozzles, and spray tips to prevent clogs. Scrub the gun components and rinse everything well.

Finally, dry all parts before putting your sprayer back together. Keep going to discover detailed tips for each step.

You should thin your paint by about 10%—that’s roughly one part thinner to ten parts paint—to get a smooth spray finish. Start by adding thinner gradually and mix thoroughly.

Then test the flow on a stick and strain the mixture to avoid clogs. If you’re using an HVLP sprayer, you might need to thin up to 20%.

Proper thinning guarantees even coverage and a professional result. Keep following along to discover the best approach for your spray system.